Ross LDP-8242 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 100

Ross LDP-8242 Скачать руководство пользователя страница 55

LDP-8242 User Manual (Iss. 03)

Operating Instructions • 3–21

continued

Shown below is an example in which received 625i50 SDI video is being up converted to 720p50. The settings shown in the

example below provide for directing the scaler to re-aspect the 4:3 input video to full, centred 16:9 re-aspecting, and mark the

output video with the AFD code representing the new re-aspected H/V format.

Note:

ARC control/converter function only manipulates output SDI ARC codes

and has no local effect on card output aspect ratio.

Noting that the incoming video contains WSS coding, Trigger on WSS is

set to ETSI, with other choices set to Off. The settings here allow ARC to

trigger only on an ETSI-coded WSS received code.

In this example, it is desired to use the H/V re-aspecting inherent in the
received video ARC, perform the re-aspecting with no modification, and
output an AFD code representing the re-aspecting performed.

As such,

Force Input Mapping

is set to

Follow Trigger

, thereby

bypassing the Output ARC Cross-Matrix Map table and directly perform
the re-aspecting defined by the received code (in this example, Letterbox
16x9). Also in this example, the scaler is directed to apply the output AFD
re-aspecting by setting

Scaler Follow AFD

to

Enabled

.

In this example, since only AFD is to be outputted,

AFD Output

is set to

Enabled

, with WSS and VI choices set to

Disabled

.

AFD Status

shows AFD code now being outputted.

The insertion line number (using its default value here), can be set using
the

AFD Output Line

controls (for the progressive format in this example,

the Field 1 control serves as the line number control).

«
...
53
54
55
56
57
...
»

Содержание LDP-8242





































































































Отзывы:

Нет отзывов