manualshive.com logo in svg

Ross LDP-8242, Руководство пользователя, Страница: 71 / 100

Поделиться
Скачать
Ross LDP-8242 Скачать руководство пользователя страница 71

LDP-8242 User Manual (Iss. 03)

Operating Instructions • 3–37

(continued)

Silence as Source for Embedded Channel 

Output

Silence

 selection in Source drop-down list mutes the selected embedded 

output channel. Use this setting for any unused embedded output 

channels.
(In this example, Silence is the source for destination Embedded output 

Ch 1)

Gain / Mute Control

Provides relative gain (in dB) control and peak level display for 

corresponding embedded output channel.

Also provides a channel 

Mute

 checkbox.

(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)

Silence as Source for AES Channel Output

Silence

 selection in Source drop-down list mutes the selected AES output 

channel. Use this setting for any unused AES output channels.
(In this example, Silence is the source for destination Embedded output 

Ch 1)

Note

: If an AES pair is being used as an input, the channels do not have 

be muted here.

Gain / Mute Control

Provides relative gain (in dB) control and peak level display for 

corresponding AES output channel.

Also provides a channel 

Mute

 checkbox.

(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)

Содержание LDP-8242





































































































Отзывы:

Нет отзывов