Rohde & Schwarz RTM20 Series Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 499

Rohde & Schwarz RTM20 Series Скачать руководство пользователя страница 68

Triggers

R&S

®

RTM20xx

53

User Manual 1317.4726.02 ─ 01

Trigger On

Sets an additional delay condition for the B-event: time delay or event delay. According
to this selection, set also "Time" or "Events" to define the condition completely.

Remote command:

Time

Sets the time the instrument waits after an A-event until it recognizes B-events.

Remote command:

Events

Sets a number of B-trigger events that fulfill all B-trigger conditions but do not cause the
trigger. The oscilloscope triggers on the n-th event (the last of the specified number of
events).

Remote command:

Hysteresis A / B

Sets a hysteresis range around the trigger level. If the signal jitters inside this range and
crosses the trigger level thereby, no trigger event occurs. Thus, hysteresis avoids unwan-
ted trigger events caused by noise oscillation around the trigger level.

Hysteresis is available for the edge trigger (A-event and B-event) and for the width trigger.

To see the hysteresis on the display, activate "Trigger Hyst." in the "Display > Auxillary
Cursors" menu.

The hysteresis value depends on the vertical scale.

Remote command:

Reference for Triggers

«
...
66
67
68
69
70
...
»

Содержание RTM20 Series




















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов