Rohde & Schwarz RTM20 Series Скачать руководство пользователя страница 224 | Manualshive

Страница: 224 / 499

Rohde & Schwarz RTM20 Series Скачать руководство пользователя страница 224

Mixed Signal Option (MSO, R&S

RTM-B1)

R&S

®

RTM20xx

209

User Manual 1317.4726.02 ─ 01

The following measurement types are available for single digital channels (bits): fre-
quency, period, edge and pulse counts, phase, delay, duty cycle, burst width. Statistical
evaluation of these measurements is also possible.

12.2 Digital Channels

12.2.1 Digital Channels - Configuration Settings

Access: PROTOCOL LOGIC > if "Protocol" menu is displayed: "Logic"

D7-D0 / D15-D8

Enables or disables all digital channels of the pod at once.

Visible

Enables or disables individual digital channels.

Turn the navigation knob to select the digital channel, then press the knob to enable or
disable the channel.

Remote command:

Threshold

Opens the "Threshold" menu.

You can set the digital threshold in several ways:

●

The same threshold and hysteresis is used for all digital channels: Enable "Couple
Levels" and set the values.

●

Different thresholds and hysteresis are used for individual channel groups (nibbles):
Disable "Couple Levels" and set the threshold and hysteresis for each nibble.

Nibble ← Threshold

Selects a group of 4 digital channels for which the threshold and the hysteresis can be
set.

Threshold ← Threshold

Sets the threshold value for the selected nibble, or for all digital channels if "Couple Lev-
els" is enabled.

The threshold setting is available if "Technology" is "User Level".

Digital Channels

«
...
222
223
224
225
226
...
»

Содержание RTM20 Series




















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов