Rohde & Schwarz RTM20 Series Скачать руководство пользователя страница 321

Страница: 321 / 499

Remote Control

R&S

RTM20xx

306

User Manual 1317.4726.02 ─ 01

Parameters:

POSitive | NEGative

POSitive

Positive going pulse, the width is defined from the rising to the
falling slopes.

NEGative

Negative going pulse, the width is defined from the falling to the
rising slopes.
*RST:

POSitive

TRIGger:A:WIDTh:RANGe

Defines how the measured pulse width is compared with the given limit(s).

Parameters:

WITHin | OUTSide | SHORter | LONGer

WITHin | OUTSide

Triggers on pulses inside or outside a range defined by

time ±

delta

. The time is specified with

TRIGger:

WIDTh:

WIDTh

, the

range around is defined with

TRIGger:

WIDTh:

DELTa

SHORter | LONGer

Triggers on pulses shorter or longer than a time set with

TRIGger:

WIDTh:

WIDTh

*RST:

LONGer

TRIGger:A:WIDTh:DELTa

<Delta>

Defines a range around the width value specified using

TRIGger:

WIDTh:

WIDTh

Parameters:

<Delta>

Range

±Δ

t ("Variation" softkey)

Range:

Depends on the defined pulse width
(TRIG:A:WIDTH:WITDH)

TRIGger:A:WIDTh:WIDTh

<Time1>

For the ranges WITHin and OUTSide (defined using

TRIGger:

WIDTh:

RANGe

), the

<Time1> defines the center of a range which is defined by the limits

<Delta> (set with

TRIGger:

WIDTh:

DELTa

For the ranges SHORter and LONGer, the width defines the maximum and minimum
pulse width, respectively.

Command Reference

Содержание RTM20 Series




















































































































































































































































































































































































































































































































Результаты поиска

Содержание RTM20 Series

Отзывы:

Rohde & Schwarz RTM20 Series, Руководство пользователя, Страница: 321 / 499

Результаты поиска

Содержание RTM20 Series

Отзывы: