RITE-HITE FasTrax XL, Инструкция по установке/обслуживанию/эксплуатации

Страница: 40 / 92

FasTrax
®
XL
Installation/Service/Owner's Manual
Rite‑Hite
®
40 Publication: AMEN00316 2020-07-06
INSTALLATION
Virtual Vision
(OPTIONAL)
Virtual Vision equips the door (front and back) with a motion sensor and dual LED light bars (1 each right and left side
of the door opening) If a sensor detects a moving pedestrian or forklift on 1 side of the door, the LEDs on the opposite
side flash to alert oncoming traffic.
Front View Back View
A
E
E
D C
B
D
C
36in [914mm]
36in
[914mm]
A
36in
[914mm]
49in
[125M]
A1
E1
A1
E1
B1
36in
[914mm]
49in
[125M]
NOTE:
• When mounting Virtual Vision light bars along the edge
of each wall, place to avoid impact damage
• Program motion sensor for a 2-second hold time and
bi-directional detection
Front Side of Door/Wall
1 Install 2 Virtual Vision light bar assemblies (A)
≈ 36in [914mm] from the floor, on each side of
the door
2 Mount 1 Virtual Vision motion sensor (B) on the upper
corner Direct the motion sensor, so it does not extend
past the opening of the door
3 Mount Virtual Vision junction box (C) 36in [914mm]
from top of door to top of junction box
4 Mount control box (D) 36in [914mm] from side of door
to outside of the box
5 Connect Virtual Vision cables (E) and wire into the
control box (D)
Back Side of Door/Wall
6 On the opposite side of the wall, install 2 Virtual
Vision light bar assemblies (A1) ≈ 36in [914mm] from
the floor, on each side of the door
7 Mount 1 Virtual Vision motion sensor (B1) on the
upper corner Direct the motion sensor, so it does not
extend past the opening of the door
8 Connect Virtual Vision cables (E1) and wire into the
control box (D)
Figure 67