RITE-HITE FasTrax XL, Инструкция по установке/обслуживанию/эксплуатации

Страница: 38 / 92

FasTrax
®
XL
Installation/Service/Owner's Manual
Rite‑Hite
®
38 Publication: AMEN00316 2020-07-06
INSTALLATION
Counterweight
Continued
M
L
K
M
12 Leave ≈ 6in [152mm] of the strap beyond the clamp
and remove the excess strap material Secure the
free end of the strap to the main portion of the strap
with tape
13 Slide the counterweight tube (K and L) over the
counterweight Secure the tubes to the brackets using
cable ties (M) Use caution not to overtighten the
cable ties and distort the tube
NOTE:
The number of counterweight tube segments
required may vary depending on the door height
Place the shortest tube section(s) at the bottom with
bell ends facing down
Lintel Rollers
NOTE:
Not provided on extended projection version
1 Verify there is a wall surface at the header for the rear
top seal to seal against If not, one must be provided
in order for curtain to seal to wall
Front View
Side View
A
B
C
D
E
B
C
B
F
A Top of Lintel
B Vision
C Lintel Roller Assembly
D Jamb
E Curtain
F Bottom
2 Place curtain so the vision is at the lintel and place
a mark on the wall at the center of visions DO NOT
place over vision area. If no vision, space evenly
3 Mount the lintel roller assembly (C) on the front face
of the jamb (D) with bottom of roller flush with jamb
DO NOT install on underside of jamb.
C
Figure 59
Figure 60
Figure 61