Ricoh AFICIO AP306, Руководство по установке

Страница: 336 / 382

Draft 2000/06/22
NetWare Configuration
62
4
D
Click [TCP/IP protocol] .
E
Click the IP address of the Network Interface Board which is to be config-
ured, and click
[Next >]
.
Note
❒
If you do not know which Network Interface Board you are configuring,
see a network configuration page to confirm the MAC address (Network
Address).
F
Confirm that the MAC address and IP address are correct, and click
[Finish]
.
The
[NIB Setup Tool]
window appears.
G
Click [Configure] .
The property sheet appears.
H
Click the
[General]
tab, and type the name of the print server into the
[Device
Name:] box.
I
Click the [NetWare] tab, and make the following settings.
A
In the [Print Server Name:] box, type the name of the print server.
B
In the [File Server Name:] box, type the name of the file server in which a
print server is to be created.
Clicking
[Browse]
, you can select a file server among those listed in the
[Browse File Server] dialog box.
C
In the [NDS Context:] box, type the context of the print server.
Clicking [Browse] , you can select a NDS tree and a NDS context among
those listed in the [Browse Context] dialog box.
As a context, object names are typed from a lower object and divided by a
period. For example, if you want to create a print server into NET under
DS, type "NET.DS".
D
In the
[Print Server Operation Mode]
group, click
[As Print Server]
.
E
Click
[OK]
to close the property sheet.
F
After a confirmation dialog box appears, click [OK] .
J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
After this step, go to step
K
on P.59 “Setting Up as a Print Server” .