Ricoh AFICIO AP306, Руководство по установке

Страница: 236 / 382

Draft 2000/06/22
Using RICOH-SCRIPT2 with Windows
14
1
Note
❒
You can change this setting by changing the memory setting in [Installable
Options]
.
❖
Halftone
Select the halftone pattern you want to use for printing. The following items
are available:
[Use Printer Halftone] and [Use System Halftone] .
Note
❒
You can select [Use settings below] , but you cannot modify [Screen frequency]
or
[Screen angle]
.
❖
Halftone Setup
You can change the halftone settings.
❖
Form to Tray Assignment
You normally do not need to change this setting.
Note
❒
If the paper tray you want to use is not available here, even though it is
physically installed, use the
[Device Settings] tab to make the printer recog-
nize the tray correctly.
❖
Font Substitution Table
Use this to edit the TrueType font substitution table. Under [Font Substitution
Table] , the TrueType fonts installed on the computer are displayed. Select the
setting you want to use from
[Change Setting]
for each TrueType font.
❖
Job Timeout
Use this to set a job timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the job timeout off.
❖
Wait Timeout
Use this to set a wait timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the wait timeout off.
❖
Total Printer Memory
Use this to select the amount of memory actually installed in the printer. The
following items are available:
[32 MB] (only the simplex printer), [64 MB] , [96
MB]
,
[128 MB]
,
[160 MB]
,
[192 MB]
and
[256 MB]
.
❖
Option Tray
Use this to select if the optional tray is installed in the printer. The following
items are available:
[None] , [Tray 2] and [Tray 3] .