Ricoh AFICIO AP306, Руководство по установке

Страница: 330 / 382

Draft 2000/06/22
NetWare Configuration
56
4
J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K
Type “PCONSOLE” from the command prompt.
F:> PCONSOLE
L
Create a print queue as follows.
Note
❒
If you use a currently defined print queue, go to step
L
.
A
From the
[Available Options]
menu, select
[Print Queue Information]
and press
the
{
ENTER
}
key.
B
Press the
{
INSERT
}
key and type a print queue name.
C
Press the
{
ESC
}
key to return to the [Available Options] menu.
M
Create a printer as follows.
A
From the [Available Options] menu, select [Print Server Information] and press
the
{
ENTER
}
key.
B
To create a new print server, press the
{
INSERT
}
key and type a print
server name.
If you use an currently defined print server, select one of the print servers
shown in the
[Print Server] list.
Important
❒
Use the same name as that specified in the NIB Setup Tool. (Step
H
).
C
From the [Print Server Information] menu, select [Print Server Configuration] .
D
From the [Print Server Configuration] menu, select [Printer Configuration] .
E
Select the printer which is indicated as “Not Installed”.
Important
❒
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step
I
-
D
).
F
If you change the name of the printer, type a new name.
A name "Printer x" is assigned to the printer. x stands for the number of the
selected printer.
G
As type, select [Remote Parallel, LPT1] .
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H
Press the
{
ESC
}
key, and click [Yes] in the confirmation dialog box.
I
Press the
{
ESC
}
key to return to [Print Server Configuration Menu] .