Fig. 7-11:
Command values dialog
Sub-dialog Speed Adaptation
The speed adaptation dialog is used to configure the rate and limits at which
the speed is adjusted by the Sytronix function. It includes the swivel angle
control section, which is closed loop and the pressure boost function which is
technically an open loop control. Usually only K_I is adjusted. K_P and K_D
should in all regular cases be zero. For more information, see
Fig. 7-12:
Speed adaptation dialog
DOK-SYTROX-DRN5020****-IT05-EN-P
Bosch Rexroth AG
65/143
Frequency-Controlled Pump Drive System Sytronix DRn 5020
Commissioning of Sytronix DRn 5020 System
