1.3
Representation of Information
1.3.1
Consistency
Consistent safety instructions, symbols, terms and abbreviations are used so
that you can quickly and safely work with your product using this documenta‐
tion. For a better understanding, they are explained in the following sections.
1.3.2
Safety Instructions
In this documentation, safety instructions are included whenever sequences
of actions are explained which bear the danger of personal injury or damage
to property. The hazard avoidance measures described must be observed.
Safety instructions are structured as follows:
SIGNAL WORD
Type and source of danger
Consequences in case of non-compliance
●
Hazard avoidance measures
●
<Enumeration>
●
Warning sign: Draws attention to the danger
●
Signal word: Identifies the degree of danger
●
Type and source of danger: Identifies the type and source of danger
●
Consequences: Describes the consequences of non-compliance
●
Precaution: Specifies how the hazard can be prevented
Risk classes according to ANSI Z535.6-2006
DANGER
Indicates a dangerous situation which will cause death or severe injuries if
not prevented.
WARNING
Indicates a dangerous situation which may cause death or severe injuries if
not prevented.
CAUTION
Indicates a dangerous situation which may cause minor to medium injuries if
not prevented.
NOTICE
Indicates damage to property: The product or the environment could be dam‐
aged.
DOK-SYTROX-DRN5020****-IT05-EN-P
Bosch Rexroth AG
9/143
Frequency-Controlled Pump Drive System Sytronix DRn 5020
About this Documentation
