Fig. 6-7:
Connection total shield with cable extension
4. Cut the soldered cable accordingly and finally assemble the correct ring
terminal with a crimping tool.
Fig. 6-8:
Cut shield extension in a suitable way and assemble the ring
terminal
Connect the temperature sensor
To protect the motor from thermal overload, the temperature sensor for motor
protection must be connected to the drive controller. Observe the connection
designation under
fig. 6-4 "Connection designation within terminal boxes" on
and the notes about temperature sensor in the document.
Also refer to R911343624 "Rexroth IndraDyn E Standard Motors MOT-FC for
Frequency Converter Operation"
motor data sheet under
chapter 1 "About this Documentation" on page 7
.
In case that there is no motor temperature sensor available, it is recommen‐
ded to use the internal motor temperature model. For details refer to
R912005854 "Frequency Converter EFC 3610 / EFC 5610 Operating Instruc‐
tions" under chapter 12.10.2 "Motor Protection".
DOK-SYTROX-DRN5020****-IT05-EN-P
Bosch Rexroth AG
51/143
Frequency-Controlled Pump Drive System Sytronix DRn 5020
Assembly and Installation
