Fig. 7-19:
System configuration-pump data
The pump type selection can be set from the available table
with the dialog above. The hyperlink "Pump
Data" only appears if “Manual” type is selected. For this case, the pump data
from previous selection stays in the pump parameters. From this selection
the user can open the pop up window and manually change to the values de‐
sired from the pump data sheet.
DOK-SYTROX-DRN5020****-IT05-EN-P
Bosch Rexroth AG
71/143
Frequency-Controlled Pump Drive System Sytronix DRn 5020
Commissioning of Sytronix DRn 5020 System
