The button basic commissioning should be the first choice when you starting
with a new DRn system. It opens a guided step by step wizard, which helps
you reset the drive system, setup Master Communication, calibrate the motor
and mechanical controls and lets you also choose your important set points
and sensors. After this your system should already start running. After you hit
the button ⑪ “Basic Commissioning”, the following window opens.
Fig. 7-6:
Commissioning wizard
Step 1: Input / Output configuration
Input and Output can be delivered through communication bus, digital inputs
or analog inputs. At this step following the link the user can set Master Com‐
munication Interface. For more communication parameters, go to communi‐
cation dialog ⓛ and ④ (See
fig. 7-3 "Sytronix DRn5020 dialog" on page 59
Step 2: Motor configuration
Choosing the motor type to "MOT-FC" if you have one (otherwise select oth‐
ers). Then go through "Motor Parameter" link and enter the motor data man‐
ually. If you have chosen "MOT-FC" you don’t have to enter the parameters
in the following window and then go to "Take remote control" link get control
of the drive, go back to the Auto-Tuning dialog.
DOK-SYTROX-DRN5020****-IT05-EN-P
Bosch Rexroth AG
61/143
Frequency-Controlled Pump Drive System Sytronix DRn 5020
Commissioning of Sytronix DRn 5020 System
