REXROTH IndraDrive Fc FCS01, Руководство по эксплуатации

Страница: 137 / 238

Rexroth IndraDrive FCS01.1 Parameterization
11-49
DOK-INDRV*--FCS01*****-IB01_EN-P
Parameter Setting value / description / note Device Supervisor Parameter record
P736 DC bus voltage
0 ... 1000 V DC Indicates the current DC bus voltage.
P737
Current capacity
utilization braking
resistor
0 ... 1000 % This parameter informs on the current capacity utilization of the braking resistor in
regenerative operation when the parameters P556 and P557 have been set correctly.
If P556 = 0 and P557 = 0 are set, this parameter informs on the control factor of the
brake chopper in FC.
P738
Current capacity
utilization motor
0 ... 1000 % Indicates the current motor capacity utilization. Calculation of motor data based on
P201…P209.
P739
Current temperature
heat sink
0 ... 100 °C Indicates the current temperature of the FC heat sink.
P740
... - 01
...
... - 13
Process data bus in
S
0000 ... FFFF (hex) This parameter
informs about the
current control word
and the setpoint
values which are
transmitted through
the bus systems.
... - 01 = control word
... - 02 = setpoint value 1
... - 03 = setpoint value 2
... - 04 = setpoint value 3
... - 05 = Bus I/O in bits (P480)
... - 06 = parameter data in 1
... - 07 = parameter data in 2
... - 08 = parameter data in 3
... - 09 = parameter data in 4
... - 10 = parameter data in 5
... - 11 = setpoint value 1
... -12 = setpoint value 2
... -13 = setpoint value 3
control word, source
from P509.
setpoint data of the
main setpoint value
P510 -01.
The indicated value
represents all "bus in bit
sources" logically OR
linked.
Data with parameter
transmission.
Setpoint value data of
secondary setpoint value
P510 -02.