Raritan PXE, Руководство пользователя

Страница: 139 / 382

Chapter 6: Using the Web Interface
123
Action Function
Alarm Requires the user to acknowledge the alert
when it is generated. If needed, you can have
the alert notifications regularly generated when
no one takes the acknowledgment action. See
Alarm
(on page 125).
Log event message Records the selected events in the internal log.
See
Log an Event Message
(on page 126).
Send SMTP message Emails a textual message. See
Send EMail
(on page 127).
Send SNMP
notification Sends SNMP traps or informs to one or
multiple SNMP destinations. See
Send an
SNMP Notification
(on page 128).
Syslog message Makes the PXE automatically forward event
messages to the specified syslog server. See
Syslog Message
(on page 130).
Send Sensor Report Reports the readings or status of the selected
sensors, including internal or external sensors.
See
Send Sensor Report
(on page 131).
Switch Peripheral
Actuator Switches on or off the mechanism or system
connected to the specified actuator. See
Switch Peripheral Actuator
(on page 132).
Note: The PXE does NOT support the connection of an external
beeper, modem, or webcam so do NOT select unsupported actions,
including "External Beeper," "Send Snapshots via SMTP," "Send
SMS Message" and "Record Snapshots to Webcam Storage."
6. Click OK to save the new action.
Note: If you do not click OK before quitting the current settings page,
a message appears. Then click Yes to save the changes, Discard to
abort or Cancel to return to the current settings page.
7. To create additional actions, repeat the above steps.
8. Click Close to quit the dialog.