Raritan PXE, Руководство пользователя

Страница: 47 / 382

Chapter 5: Using the PDU
31
Manual Mode
You can press the Up or Down button to enter the Manual Mode so that
a particular line or the inlet's active power is selected to show specific
readings.
To operate the LED display:
1. Press the Up or Down button until the desired line's number is
selected in the two-digit row. Or you can press either button to select
the inlet's active power, which is shown as
AP
.
 Pressing the (UP) button moves up one selection.
 Pressing the (DOWN) button moves down one selection.
2. When selecting a line, you can press the Up and Down buttons
simultaneously to switch between voltage, active power and current
readings.
 Current of the selected component is shown in the three-digit row.
Simultaneously the CURRENT(A) LED is lit. See
LEDs for
Measurement Units
(on page 30).
 When the voltage is displayed, the VOLTAGE(V) LED is lit. It is
displayed for about five seconds, after which the current reading
re-appears.
 When the active power is displayed, the POWER(kW) LED is lit.
It is displayed for about five seconds, after which the current
reading re-appears.
3. When selecting the inlet (AP), it displays the active power reading.
 When the active power is displayed, the POWER(kW) LED is lit.
Note: The LED display returns to the Automatic Mode after 20 seconds
elapse since the last time any button was pressed.