Raritan PXE, Руководство пользователя

Страница: 108 / 382

Chapter 6: Using the Web Interface
92
2. To modify the IPv4 firewall rules, click the IPv4 tab. To modify the
IPv6 firewall rules, click the IPv6 tab.
3. Ensure the Enable IPv4 Access Control checkbox is selected on the
IPv4 tab, or the Enable IPv6 Access Control checkbox is selected on
the IPv6 tab.
4. Select the rule to be modified in the rules list.
5. Click Edit or double-click the rule. The Edit Rule dialog appears.
6. Make changes to the information shown.
7. Click OK.
8. Click OK to quit the Configure IP Access Control Settings dialog, or
the changes are lost.
Sorting Firewall Rules
The rule order determines which one of the rules matching the same IP
address is performed.
To sort the firewall rules:
1. Choose Device Settings > Security > IP Access Control. The
Configure IP Access Control Settings dialog appears.
2. To sort the IPv4 firewall rules, click the IPv4 tab. To sort the IPv6
firewall rules, click the IPv6 tab.
3. Ensure the Enable IPv4 Access Control checkbox is selected on the
IPv4 tab, or the Enable IPv6 Access Control checkbox is selected on
the IPv6 tab.
4. Select a specific rule by clicking it.
5. Click or to move the selected rule up or down until it
reaches the desired location.
6. Click OK.
Deleting Firewall Rules
When any firewall rules become obsolete or unnecessary, remove them
from the rules list.
To delete a firewall rule:
1. Choose Device Settings > Security > IP Access Control. The
Configure IP Access Control Settings dialog appears.
2. To delete the IPv4 firewall rules, click the IPv4 tab. To delete the
IPv6 firewall rules, click the IPv6 tab.