Raritan PXE, Руководство пользователя

Страница: 48 / 382

Chapter 5: Using the PDU
32
Reset Button
The reset button is located inside the small hole near the display panel
on the PDU.
Pressing this reset button restarts the PXE device's software without any
loss of power to outlets. This operation also power cycles the LED
display, causing the LED display to go blank and then return to normal.
The following image indicates the locations of the reset button on the
PXE device.
Circuit Breakers
PXE models rated over 20A (North American) or 16A (international)
contain overcurrent protectors, which are usually branch circuit breakers.
These circuit breakers automatically trip (disconnect power) when the
current flowing through the circuit breaker exceeds its rating.
When a circuit breaker trips, power flow ceases to all outlets connected
to it. You must manually reset the circuit breaker so that affected outlets
can resume normal operation.
Depending on the model you purchased, the circuit breaker may use a
button- or handle-reset mechanism.
Resetting the Button-Type Circuit Breaker
Your button-type circuit breakers may look slightly different from the
images shown in this section, but the reset procedure remains the same.
To reset the button-type breakers:
1. Locate the breaker whose ON button is up, indicating that the
breaker has tripped.