Raritan Dominion SX II, Руководство администратора

Страница: 90 / 272

Chapter 6: SX II Administration
83
This feature limits a user's access to the SX II by allowing you to assign
them to a group that can only access the device through specific IP
addresses.
This feature applies only to users belonging to the specific group. This is
unlike the IP Access Control List feature that applies to all access
attempts to the device. IP access control takes priority over group-based
IP ACL and is processed first.
Use the IP ACL section of the Group page to add, insert, replace, and
delete IP access control rules on a group-level basis.
To add (append) rules:
1. Type the starting IP address in the Starting IP field.
2. Type the ending IP address in the Ending IP field.
3. Choose the action from the available options:

Accept - IP addresses set to Accept are allowed access to the
SX II device.

Drop - IP addresses set to Drop are denied access to the SX II
device.
4. Click Append and then click OK. The rule is added to the bottom of
the rules list. Repeat steps 1 through 4 for each rule you want to
enter.
To insert a rule:
1. Enter a rule number (#). A rule number is required when using the
Insert command.
2. Enter the Starting IP and Ending IP fields.