Raritan Dominion SX II, Руководство администратора

Страница: 265 / 272

Appendix C: FAQs
258
Serial-over-IP Sessions and Access
multiple SX II's to another SX II with straight
Cat5 cables. Second you can connect the
DVI/USB local ports of the SX II's to a KVM
switch like the Dominion KX III. This can
give you access to multiple SX II's in and
around the data center.
What baud rates are supported?
Multiple baud rates are supported: 1200,
1800, 2400, 4800, 9600 (default), 19200,
28800, 38400, 57600, 115200, and 230400
bits per second. Can set this on a per port
basis from the Port Configuration page or
CLI.
What code-sets does the terminal
emulator in Dominion SX II support?
Dominion SX release 3.0 or higher supports
VT100/VT220/VT320 and ANSI with the
following code-sets: default, US-ASCII, ISO-
8859-1, ISO-8859-15, UTF-8, Shift-JIS,
EUC-JP, EUC-CN, and EUC-KR.
How many serial devices can be
simultaneously accessed through a
given SX II?
A group of users can simultaneously access
all the serial devices connected to a SX II.
For example, with a 48 port SX II, users can
simultaneously connect to and access all 48
serial devices connected to it!
How many users can simultaneously
access a single serial device
connected to a SX II
Up to ten users can access a single serial
device at the same time, up to a limit of two
hundred simultaneous accesses per SX II.
For example, on a 32 port SX II, six users
could each simultaneous access each of
the 32 serial devices connected to it for a
total of 192 user sessions. This would not
be a typical user scenario, but illustrates the
powerful serial processing capacity of the
SX II.
Is the Dominion SX unit SUN®
"break-safe"
All Dominion SX units are SUN "break-safe"
for use with SUN Solaris.
Connecting to Serial Devices