Raritan Dominion SX II, Руководство администратора

Страница: 216 / 272

Chapter 6: SX II Administration
209
Command Description Parameters
telnet
Enable or disable Telnet
access.
Due to the lack of security,
the username, password
and all traffic is in clear-text
on the wire.
Telnet must be enabled
before it can be used; it is
disabled by default.
By default, the telnet port is
set to 23 but can be
changed by issuing the
following command.

enable <true | false> - Enable or disable Telnet
access, enable (true), disable (false)

port <value> - Telnet server tcp listen port
Configure Direct Port Access Using CLI
The permitted TCP Port Range is 1024-64510. When run without the
mode parameter, the system displays the current dpa type.
Enter
admin > Config > Services >
to access this menu.
Command Description Parameters
dpa Enable direct port access

enable <true | false> - DPA access, enable (true),
disable (false)

url <true | false> - DPA via URL, enable (true),
disable (false)

loginstring <true | false> - Allow specifying DPA
port in username when logging in, enable (true),
disable (false)
dpaport Configure the IP/SSH/telnet
DPA ports for specified serial
ports.

port <number | range | *> - Port(s) to view/modify
(Single port or range of ports (1-n or 1,3,4 or * for
all ports))

dpaip <ipaddress> - IP Address assigned for
direct port access. 0.0.0.0 clears the setting.

telnet <port number> - TCP Port assigned for
direct port access via Telnet. 0 clears the setting.

ssh <port number> - TCP Port assigned for direct
port access via SSH. 0 clears the setting.
Anonymous Connections