Raritan Dominion SX II, Руководство администратора

Страница: 20 / 272

Chapter 2: Configure SX II for the First Time
13

Connect a keyboard tray or KVM console to the DVI-D and USB
ports.

Connect a laptop to the MiniUSB Admin port.
2. The emulator interface opens once you are connected to SX II.
Press the Enter key on your keyboard.
3. When the
Login
prompt appears, enter the default username
admin
and password
raritan
. Use all lowercase letters.
4. You are prompted to change the default password. Do so now, and
be sure to remember this password for future login. When creating a
password via CLI, it cannot begin with a space or end with a space.
This does not apply to creating passwords in using the Remote
Console.
By default, the network is configured for a static IP address.
5. At the
admin >
prompt, enter
config
and at the next prompt enter
network
.
6. At the
admin > config > network >
prompt, enter
interface if lan1 ipauto none ip <ip address> mask
<mask> gw <gateway ip address>
To use DHCP, enter
interface if lan1 ipauto dhcp
7. Give the device a name to help identify it.
Enter
"name devicename <DSX2 name>"
.
Up to 32 characters are supported for the name. Spaces and special
characters not supported.
8. At the
admin > config > network
prompt, enter
quit
to get
into upper menu
admin > config
, then enter
time
.
9. At the
admin > config > time >
prompt, set the date and time
on the SX II.

Enter
timezonelist
and find the number code that
corresponds to your time zone.

Enter
clock tz <timezone code> date <date string>
time <time string>
where
<timezone code>
is the time zone code,
<time
string>
is the current time in "HH:MM:SS" format and
<date
string>
is the current date in "YYYY-MM-DD" format (quotes
included, uses 24-hour time).
Example:
clock tz 9 date "2015-08-15" time
"09:22:33"