Raritan Dominion SX II, Руководство администратора

Страница: 132 / 272

Chapter 6: SX II Administration
125

Community - the appliance's community string

Community Type - grant either Read-Only or Read-Write access
to the community users
Note: An SNMP community is the group to which appliances and
management stations running SNMP belong. It helps define where
information is sent. The community name is used to identify the
group. The SNMP device or agent may belong to more than one
SNMP community.
6. Complete the following fields for SNMP v3 (if needed):

Select Use Auth Passphrase if one is needed. Select this option
if you want to use the same pass phrase for the authorization
pass phrase and privacy pass phrase without having to re-enter
it.

Security Name - the username or service account name of the
entity communicating with the SNMP agent (up to 32
characters).

Authentication Protocol - the MD5 or SHA authentication protocol
used by the SNMP v3 agent.

Authentication Passphrase - the pass phrase required to access
the SNMP v3 agent (up to 64 characters).

Privacy Protocol - if applicable, the AES or DES algorithm used
to encrypt PDU and context data.

Privacy Passphrase - if applicable, the pass phrase used to
access the privacy protocol algorithm (up to 64 characters).
Next, configure SNMP traps. This is done on the Event Management -
Settings page, which can be quickly accessed by clicking the SNMP
Trap Configuration link at the bottom of the Device Services page. See
Configuring SNMP Traps for information on creating SNMP traps and
List of SX II SNMP Traps for a list of available SX II SNMP traps.
The events that are captured once an SNMP trap is configured are
selected on the Event Management - Destination page. See Configuring
Event Management - Destinations.