Raritan Dominion SX II, Руководство администратора

Страница: 50 / 272

Chapter 4: Access Targets
43
Note that connecting to the SX II Local Console via the Local port is an
independent access path to each connected target device.
Video Resolution
The default, Local Console port video resolution is 1024x768@60.
By default, monitors are typically set to the highest resolution they
support.
Once a monitor is connected to the SX II Local Port DVI, SX II EDID
information from the monitor, including its native, preferred resolution. SX
II uses the monitor's preferred, native resolution as long as it is a
resolution that SX II supports. If it is not, SX II switches to a resolution it
supports and that most closely matches the monitor's resolution.
For example, if a monitor with a native resolution of 2048x1600@60Hz is
connected to SX II, SX II detects that it is not an SX II supported
resolution and selects a resolution it does support, such as
1280x1024@60Hz.
Note that you can connect to targets using the Remote Console and
manage them using Raritan Serial Console (RSC). See
Raritan Serial
Console (RSC) Help (on page 47) and Port Action Menu Options -
Connect, Disconnect, Power On, Power Off and Power Cycle
Targets
(on page 35) .
Connect Commands
Connect to a port.
admin > connect <port number>
Port Sub-Menu Commands
The port sub-menu can be reached using the escape key sequence.
Clear history buffer for this port.
admin > [portname] > clearhistory
Close this target connection. When a target is disconnected, the
appropriate disconnect message appears.
admin > [portname] > close, quit, q
Display the history buffer for this port.
admin > [portname] > gethistory
Get write access for the port.
admin > [portname] > getwrite
Return to the target session.
admin > [portname] > return