Raritan Dominion SX II, Руководство администратора

Страница: 119 / 272

Chapter 6: SX II Administration
112
4. Create a script file named
<Device_Type>_<Serial_Number_Of_Device>.autoscript
containing all of the scripts that need to be executed on the
appliance to configure it.
5. Copy all above files to the top directory of the USB stick.
6. Remove any file named
<Device_Type>_<Serial_Number_Of_Device>_result.txt
.
7. Following are examples of the files you should have on your USB in
the end.
!automatic_config
credential
DSX2_QVY4C00007.autoscript
8. Add other script files for other devices on the same USB stick, if
needed.
9. Safely remove the USB stick from the client machine when done.
Execute Auto Configurations with a USB Stick
Following are steps to configure SX IIs using an auto configuration from
a USB stick.
Prepare the USB stick and put the auto configuration file on it. See and ,
if you have not already done so.
1. Make sure device is in working condition.
2. Plug the prepared USB stick in to a USB drive on either the front or
back of the SX II you are configuring.
3. The script executes automatically after validating the username and
password credentials.
4. Once the script finishes, SX II beeps twice and the
<Device_Type>_<Serial_Number_Of_Device>_result.txt
file is generated and saved at the top directory of the USB stick.
5. You can then unplug the USB stick.
Important - the script will stop executing if you unplug the USB stick prior
to its completion.