Raritan Dominion SX II, Руководство администратора

Страница: 203 / 272

Chapter 6: SX II Administration
196
Command Description Parameters
password Create a new password, if needed.

new password
Configure Power Strips Using CLI
Note: These functions can also be managed from the Remote Console.
See
Configure Power Strips from the Remote Console (on page 71).
The following power commands allow you to manage power strips
attached to SX II.
Enter
admin > power
to access the menu.
Command Description Parameters
associate Associate a power strip
outlet to a SX II port.

<port number> - SX port number to associate

<powerstrip name> - Name of power strip to access

<outlet number> - Outlet number on power strip to
associate
cycle
Power cycle specified
power strip.
Note: If you are connecting
a PX to SX II, it is
recommended you set the
power cycle time to 5
seconds.

<port number> - SX port number to cycle

<powerstrip name> - Name of power strip to access

<outlet number> - Outlet number on power strip to
cycle
off Power off a specified power
strip.

<port number> - SX port number to turn off

<powerstrip name> - Name of power strip to access

<outlet number> - Outlet number on power strip to
turn off
on Power off a specified power
strip.

<port number> - SX port number to turn on

<powerstrip name> - Name of power strip to access

<outlet number> - Outlet number on power strip to
turn on
powerdelay Configure global power
strip delays.

<cycle value> - Delay between power off/on
powerstatus Get the status of a specified
power strip.

<powerstrip name> - Name of power strip to access
powerstrip Get power strip information.

<powerstrip name> - Name of power strip to access
setpowerport Configure an SX II Port to
contain a power strip.

<port number> - SX port number