Raritan Dominion SX II, Руководство администратора

Страница: 124 / 272

Chapter 6: SX II Administration
117
Enable Direct Port Access
Direct Port Access allows users to bypass having to use the SX II's Login
dialog and Port Access page.
There are three methods to access ports directly.
Note that Direct Port Access can be configured via Remote Console or
command line interface (CLI). See
Configure Direct Port Access
Using CLI (on page 209).
"Enable Direct Port Access" and "Enable Direct Port Access via
URL":
•
Direct Port Access via URL - This feature provides the ability to
directly access a port via HTTP/HTTPS by using one of following
syntax:

https://IPaddress/dpa.asp?username=username&pass
word=password&port=port number

https://IPaddress/dpa.asp?username=username&pass
word=password&portname=port name
This feature also provides the ability to enter a username and password
if the username and password is not contained in the URL.
1. To enable this feature, select Device Settings > Device Services.
The Device Service Settings page opens.
2. In the Direct Port Access section, select the "Enable Direct Port
Access" checkbox and "Enable Direct Port Access via URL"
checkbox.
3. Click OK to apply the settings.
Enable Direct Port Access via SSH/Telnet Using a Unique TCP
Port or Unique IP Address
To use this feature, you must configure a unique IP address or a unique
TCP port for a server port that SSH/Telnet can use to access SX II. The
address must be different from the SX II IP address and TCP port.
1. Select Device Settings > Device Services.
2. In the Direct Port Access section, select the "Enable Direct Port
Access" checkbox.