Raritan Dominion SX II, Руководство администратора

Страница: 174 / 272

Chapter 6: SX II Administration
167

RC4 - Secures user names, passwords and data using the RSA
RC4 encryption method. This is a 128 - bit Secure Sockets Layer
(SSL) protocol that provides a private communications channel
between the SX II device and the Remote PC during initial
connection authentication.
If you enable FIPS 140 - 2 mode and RC4 has been selected,
you will receive an error message. RC4 is not available while in
FIPS 140 - 2 mode.

AES - 128 - The Advanced Encryption Standard (AES) is a
National Institute of Standards and Technology specification for
the encryption of electronic data. 128 is the key length. When
AES - 128 is specified, be certain that your browser supports it,
otherwise you will not be able to connect. See
Checking Your
Browser for AES Encryption (on page 168) for more
information.

AES - 256 - The Advanced Encryption Standard (AES) is a
National Institute of Standards and Technology specification for
the encryption of electronic data. 256 is the key length. When
AES - 256 is specified, be certain that your browser supports it,
otherwise you will not be able to connect. See
Checking Your
Browser for AES Encryption (on page 168) for more
information.
Note: If you are running Windows XP
®
operating system with Service
Pack 2, Internet Explorer
®
7 cannot connect remotely to the SX II
using AES-128 encryption.
2. For government and other high security environments, enable FIPS
140-2 Mode by selecting the Enable FIPS 140-2 checkbox. See
Enabling FIPS 140-2 for information on enabling FIPS 140-2.
3. PC Share Mode - Determines global concurrent remote access,
enabling up to remote users to simultaneously log into one SX II and
concurrently view and control the same target device through the
device. Click the drop-down list to select one of the following options:

Private - No PC share. This is the default mode. Each target
device can be accessed exclusively by only one user at a time.

PC-Share - targets can be accessed by up to ten users
(administrator or non-administrator) at one time. One user will
have write permission to the port and others will have read only,
unless this port is configured in multi-write mode.
4. If needed, select Local Device Reset Mode. This option specifies
which actions are taken when the hardware Reset button (at the
back of the device) is depressed. For more information, see
Resetting the SX II Using the Reset Button. Choose one of the
following options:

Enable Local Factory Reset (default) - Returns the SX II device
to the factory defaults.