Raritan Dominion SX II, Руководство администратора

Страница: 214 / 272

Chapter 6: SX II Administration
207
Command Description Parameters
ethernetfailover
Used to enable and
disable the ability to
failover from one LAN
to another.

enable <true/false> - Ethernet failover enable
(true), disable (false)
interface Configure network
settings for dual-LAN
failover.
By default, dual LAN
failover mode is
disabled.

ipauto <none | dhcp> - Enable DHCP as ip
configuration

<lan1 | lan2> - Select LAN interface you are
configuring.

ip <IPv4 address> - IP Address of SX II assigned for
access from the IP network

mask <subnetmask> - Subnet Mask obtained from
the IP administrator

gw ipaddress <IPv4 address> - Gateway IP
Address obtained from the IP administrator

mode <auto | 10hdx | 10fdx | 100hdx | 100fdx |
1000fdx> - Set Ethernet Mode to auto detect or
force a specified mode.

rate <none | 100mb | 10mb | 5mb | 2mb | 512kb |
256kb | 128kb> - Set a bandwidth limit for the
interface.
IPv6_interface Set IPv6 network
parameters and
retrieve existing IPv6
parameters.

ipauto <none | routerdisc> - Enable IPV6 auto
configuration

if <lan1 | lan2> - Select LAN interface you are
configuring.

ip ipaddress <ipaddress> - IPv6 address of SX II
assigned for access from the IP network.

prefixlen <prefix length> - IPV6 Address prefix
length (is the number of bits in the prefix, in range of
0-128 (decimal))

gw ipaddress <IPv6 address> - Gateway IP
Address obtained from the IP administrator.

mode <enable or disable> - IPV6 network
operational mode, enable (true), disable (false)
name Name the SX II
appliance.

devicename <value> - name assigned to SX II

hostname <value> - Preferred host name (DHCP
only)
staticroute
Configure static
routes.

enable <enable> - enable (true), disable (false)