R&S NRP2, Руководство пользователя

Страница: 161 / 437

Instrument Functions
R&S
®
NRP2
143 User Manual 1173.9157.02 ─ 03
4.6.6 Assigning names to windows
Each display window is automatically labeled with a number (1, 2, 3, 4). In addition, you
can enter a name for each window to indicate the type of measurement result. This is
particularly recommended for settings to be stored in a setup memory. The "Window
Name" dialog box in the "File" menu is used to assign names to windows.
Fig. 4-71: Window Name dialog box
Window 1...4
Assigns an individual name to each window.
SCPI command:
​
DISPlay[:
​
WINDow]<[1]..4>:
​
NAME
​
on page 243
4.7 System settings
System settings are configured in the "System" menu.
The menu provides access to the following settings:
● ​
Configuring the remote control interfaces, on page 143
● ​
Setting analog outputs, on page 149
● ​
Power Reference, on page 156
● ​
System information, on page 156
● ​
Miscellaneous, on page 158
● ​
Test measurement, on page 159
4.7.1 Configuring the remote control interfaces
The R&S NRP2 provides different interfaces for remote control. The settings are config-
ured in the "Remote Interfaces" dialog box.
In addition, the R&S NRP2 supports command sets of power meters from other manu-
facturers. Thus, it is possible for example, to conveniently replace a power meter by the
R&S
NRP2.
System settings