Applications and operating modes
R&S
®
FSWP-B1
22
User Manual 1177.5862.02 ─ 09
Pulse Measurements
The Pulse measurements secondary application requires an instrument equipped with
the pulse measurements option, R&S
FSWP-K6. This secondary application provides
measurement functions for pulsed signals.
For details, see the R&S
FSWP-K6 user manual.
Remote command:
INST:SEL PULSE
, see
Vector Signal Analysis (VSA)
The VSA secondary application requires an instrument equipped with the Vector Signal
Analysis option, R&S
FSWP-K70. This secondary application provides measurements
and evaluations for single-carrier digitally modulated signals.
For details, see the R&S
FSWP VSA user manual.
Remote command:
INST:SEL DDEM
, see
4.2
Selecting the operating mode and secondary applica-
tions
Access
: [MODE]
The default operating mode is "Signal and Spectrum Analyzer" mode, however, the
presetting can be changed.
(See the "Instrument Setup" section in the R&S
FSWP user manual).
.......................................................................................22
Selecting an MSRA secondary application
................................................................... 22
............................................................................... 23
Switching the operating mode
To switch the operating mode, select the corresponding tab (see
Remote command:
Selecting an MSRA secondary application
To start a new or replace an existing secondary application, select the corresponding
button in the correct tab.
Remote command:
New Channel ← Selecting an MSRA secondary application
The secondary application selected on this tab is started in a new channel, i.e. a new
tab in the display.
Selecting the operating mode and secondary applications