Remote commands to perform measurements in MSRA mode
R&S
®
FSWP-B1
116
User Manual 1177.5862.02 ─ 09
Suffix:
<n>
.
irrelevant
Parameters:
<State>
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Manual operation:
See
CALCulate<n>:MSRA:ALINe[:VALue]
<Position>
This command defines the position of the analysis line for all time-based windows in all
MSRA secondary applications and the MSRA primary application.
Suffix:
<n>
.
irrelevant
Parameters:
<Position>
Position of the analysis line in seconds. The position must lie
within the measurement time of the MSRA measurement.
Default unit: s
Manual operation:
See
CALCulate<n>:MSRA:WINDow<n>:IVAL
Returns the current analysis interval for applications in MSRA operating mode.
Suffix:
<n>
.
irrelevant
<n>
1..n
Return values:
<IntStart>
Analysis start = Capture offset time
Default unit: s
<IntStop>
Analysis end = capture capture time
Default unit: s
INITiate<n>:REFResh
This command updates the current measurement results to reflect the current mea-
surement settings.
No new I/Q data is captured. Thus, measurement settings apply to the I/Q data cur-
rently in the capture buffer.
The command applies exclusively to I/Q measurements. It requires I/Q data.
Commands specific to MSRA secondary applications