MSRA configuration
R&S
®
FSWP-B1
33
User Manual 1177.5862.02 ─ 09
In addition to the main measurement settings, the "Overview" provides quick access to
the main settings dialog boxes. The individual configuration steps are displayed in the
order of the data flow. Thus, you can easily configure an entire measurement channel
from input over processing to output and analysis by stepping through the dialog boxes
as indicated in the "Overview".
The "Overview" varies depending on the secondary application; for detailed descrip-
tions see the corresponding application User Manual.
If the I/Q Analyzer is used as an MSRA secondary application, the "Overview" also
provides a measurement selection button in order to perform measurements in the fre-
quency and time domain. See the R&S
FSWP I/Q Analyzer and I/Q Input User Manual
for details.
The "Overview" for the MSRA primary provides quick access to the following configura-
tion dialog boxes (listed in the recommended order of processing):
1. Input settings
Chapter 6.2, "Input source settings"
2. Amplitude settings
3. Frequency settings
Chapter 6.4, "Frequency settings"
4. Optionally, trigger settings
Chapter 6.5, "Trigger settings"
5. Bandwidth settings
Chapter 6.6, "Data acquisition and bandwidth settings"
6. Optionally, output settings
Chapter 6.7, "Output settings"
7. Analysis settings and functions
8. Display configuration
Chapter 6.8, "Display configuration"
To configure settings
► Select any button to open the corresponding dialog box.
For step-by-step instructions on configuring MSRA measurements, see
"How to perform measurements in MSRA mode"
Preset Channel
Select the "Preset Channel" button in the lower left-hand corner of the "Overview" to
restore all measurement settings
in the current channel
to their default values.
Configuration overview