Applications and operating modes
R&S
®
FSWP-B1
21
User Manual 1177.5862.02 ─ 09
Remote command:
INST:MODE MSR
, see
Switching between applications
When you switch to a new application, a set of parameters is passed on from the cur-
rent application to the new one:
●
Center frequency and frequency offset
●
Reference level and reference level offset
●
Attenuation
After initial setup, the parameters for the measurement channel are stored upon exiting
and restored upon re-entering the channel. Thus, you can switch between applications
quickly and easily.
4.1
Available secondary applications
Not all options available for the R&S
FSWP are supported as secondary applications in
the MSRA mode. The supported secondary applications are listed here. Note that
some of the applications are provided with the base unit, while others are available
only if the corresponding firmware options are installed.
Currently, only applications for
base-station
tests and applications that process I/Q
data are supported in MSRA mode, in particular:
................................................................................... 21
........................................................................................ 22
AM/FM/PM Modulation Analysis
The AM/FM/PM Modulation Analysis secondary application requires an instrument
equipped with the corresponding optional software. This secondary application pro-
vides measurement functions for demodulating AM, FM, or PM signals.
For details, see the R&S
FSWP AM/FM/PM Modulation Analysis user manual.
Remote command:
INST:SEL ADEM
, see
I/Q Analyzer
The I/Q Analyzer secondary application provides measurement and display functions
for I/Q signals. Evaluation of the captured I/Q data in the frequency and time domain is
also possible.
For details, see the R&S
FSWP I/Q Analyzer user manual.
Remote command:
INST:SEL IQ
, see
Available secondary applications