Remote commands to perform measurements in MSRA mode
R&S
®
FSWP-B1
113
User Manual 1177.5862.02 ─ 09
9.7.2
Commands to query the STATus:OPERation register
The following commands are required to query the contents of the
STATus:OPERation
register.
...................................................................................... 113
............................................................................................ 113
......................................................................................113
......................................................................................113
.......................................................................................... 114
STATus:OPERation:CONDition?
<ChannelName>
This comand reads out the CONDition section of the status register.
The command does not delete the contents of the EVENt section.
Query parameters:
<ChannelName>
String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
Usage:
Query only
STATus:OPERation:ENABle
<SumBit>,<ChannelName>
Parameters:
<SumBit>
Query parameters:
<ChannelName>
String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
STATus:OPERation:NTRansition
<SumBit>,<ChannelName>
Parameters:
<SumBit>
Query parameters:
<ChannelName>
String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
STATus:OPERation:PTRansition
<SumBit>,<ChannelName>
Parameters:
<SumBit>
Querying the status registers