Remote commands to perform measurements in MSRA mode
R&S
®
FSWP-B1
79
User Manual 1177.5862.02 ─ 09
INPut<ip>:LOSCillator:SOURce:EXTernal:LEVel
<Level>
This command selects the level of an external LO signal that is fed into the
R&S
FSWP.
Suffix:
<ip>
.
1..n
irrelevant
Parameters:
<Level>
HIGH
LO signal with high level characteristics.
LOW
LO signal with low level characteristics.
*RST:
HIGH
Example:
//Select an external LO with low signal level
CONF:PNO:MEAS RES
INP:LOSC:SOUR EXT
INP:LOSC:SOUR:EXT:LEV LOW
INPut<ip>:SELect
<Source>
This command selects the signal source for measurements, i.e. it defines which con-
nector is used to input data to the R&S
FSWP.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<Source>
RF
Radio Frequency ("RF INPUT" connector)
FIQ
I/Q data file
*RST:
RF
Manual operation:
See
9.4.1.2
Configuring the vertical axis (amplitude, scaling)
The following commands are required to configure the amplitude and vertical axis set-
tings in a remote environment.
.....................................................................................81
.......................................................................................82
Configuring MSRA measurements