Remote commands to perform measurements in MSRA mode
R&S
®
FSWP-B1
114
User Manual 1177.5862.02 ─ 09
Query parameters:
<ChannelName>
String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
STATus:OPERation[:EVENt]?
<ChannelName>
This command queries the contents of the EVENt section of the status register.
A query deletes the contents of the EVENt section.
Query parameters:
<ChannelName>
String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
Return values:
<RegisterContents> Range:
0 to 32767
Usage:
Query only
9.8
Analyzing MSRA measurements
The data that was captured by the MSRA primary application can be analyzed in vari-
ous different applications.
The analysis settings and functions available in MSRA mode are those described for
the individual applications. The MSRA primary application is in effect an I/Q Analyzer
application and has the same analysis functions and settings.
See the R&S
FSWP I/Q Analyzer User Manual for a description of the analysis func-
tions and settings available for the I/Q Analyzer and thus the MSRA primary applica-
tion.
The commands required to configure the MSRA-specific analysis line are described in
Chapter 9.9, "Commands specific to MSRA secondary applications"
9.9
Commands specific to MSRA secondary applications
Most commands for the MSRA secondary applications are identical to those described
for the individual secondary applications. However, some specific commands are avail-
able for the MSRA secondary applications only.
Configuring the analysis interval
The commands required to configure the secondary application data extracts and
analysis intervals vary depending on the secondary application. See the corresponding
application manuals for details.
Commands specific to MSRA secondary applications