Remote commands to perform measurements in MSRA mode
R&S
®
FSWP-B1
70
User Manual 1177.5862.02 ─ 09
Suffix
Value range
Description
<li>
1 to 8
Limit line
<j>
1..10
Selects an integrated measurement range.
<k>
1..8 (Limit line)
1 | 2 (Display line)
Selects a limit or display line.
<r>
1..x
Selects a half decade.
The value range depends on the number of half decades. The first
half decade in the measurement always has the value "1". For sub-
sequent half decades, add "1" to get the value "x" (the fourth half
decade, for example, would have the value "4").
<s>
1..6
Selects a (user defined) spot noise marker.
<x>
1..2
Selects a mixer in the test setup.
Selecting windows in multiple channels
Note that the suffix <n> always refers to a window in the currently selected channel.
9.3
Activating MSRA measurements
MSRA measurements requires a special operating mode on the R&S
FSWP. A mea-
surement is started immediately with the default settings.
The special MSRA primary measurement channel is of the channel type "IQ" and is
referred to by the channel name "MSRA Primary". This channel cannot be replaced,
deleted, or renamed.
........................................................................................ 70
.............................................................................................. 71
.......................................................................................... 71
...........................................................................................74
................................................................................... 74
INSTrument:CREate:DUPLicate
This command duplicates the currently selected channel, i.e creates a new channel of
the same type and with the identical measurement settings. The name of the new
channel is the same as the copied channel, extended by a consecutive number (e.g.
"IQAnalyzer" -> "IQAnalyzer 2").
The channel to be duplicated must be selected first using the
INST:SEL
command.
Activating MSRA measurements