MSRA configuration
R&S
®
FSWP-B1
34
User Manual 1177.5862.02 ─ 09
Note:
Do not confuse the "Preset Channel" button with the [Preset]
key
, which restores
the entire instrument to its default values and thus closes
all channels
on the
R&S
FSWP (except for the default channel)!
Remote command:
Specific Settings for
The channel can contain several windows for different results. Thus, the settings indi-
cated in the "Overview" and configured in the dialog boxes vary depending on the
selected window.
Select an active window from the "Specific Settings for" selection list that is displayed
in the "Overview" and in all window-specific configuration dialog boxes.
The "Overview" and dialog boxes are updated to indicate the settings for the selected
window.
6.2
Input source settings
Access
: "Overview" > "Input/Frontend" > "Input Source"
The input source determines which data the R&S
FSWP analyzes.
The default input source for the R&S
FSWP is "Radio Frequency", i.e. the signal at the
"RF Input" connector of the R&S
FSWP. If no additional options are installed, this is the
only available input source.
Further input sources
The MSRA mode application can also process input from the following optional sour-
ces:
●
External mixer
●
Power sensors
●
Active modular probes
For details, see the R&S
FSWP I/Q Analyzer and I/Q Input User Manual.
............................................................................................. 34
6.2.1
Radio frequency input
Access
: "Overview" > "Input/Frontend" > "Input Source" > "Radio Frequency"
Input source settings