R&S AFQ100A
Display
1401.3078.62 3.12
E-3
The input/output symbols in the block diagram show the currently used inputs and outputs of the
modulation generator. Unused inputs and outputs are not shown. The lines indicate the signal flow.
Symbols and labels refer to the corresponding inputs and outputs on the front and rear panel of the
modulation generator. The direction - input or output - is indicated by an arrow.
Example:
The symbols indicate the outputs for the analog I and Q signal on the
instrument front panel.
The symbols indicate the outputs for the analog I and Q signal on the
instrument front panel.
The marker characteristics are listed next to the marker symbol of the active markers.
Symbols and lines are displayed in different colours depending on their function.
The baseband signal is indicated by a three line arrow, the I- and Q-components of the signal by a
single-line arrow.
Black is used for the generated signal.
Green is used for control signals.
