R&S AFQ100A
File Management
1401.3078.62 3.27
E-3
Save
Saves the current instrument settings.
If the instrument works with loaded settings the current changes will overwrite the
setttings in the file. File name and path cannot be entered.
If the instrument does not work with loaded settings the function
Save as ...
will be
called automatically.
Save as ...
Opens the window
Choose a filename to save under
, a Windows explorer user
interface which is similar to the
Choose a file to open
window (see above).
The instrument settings can be stored in a setting file.
1. Click on the selection list
Save in:
or move the cursor with the aid of the
Tab
key to activate the selection list.
2. Click on the pop-up button or press the cursor down key to pop up the selection
list.
The available drives are listed.
3. Mark the drive where the setting file has to be stored.
The directories and files are displayed in the area below.
4. Shift the entry focus to the area underneath the
Save in:
selection list and
select the directory.
Similar to Windows user interfaces the
Save in:
selection list changes and
displayes the currently selected directory.
Note:
If a file is highlighted the file name is entered automatically in the entry field
File name:
. Then the
current settings will overwrite the setttings in the file.
5. Move the cursor to the entry field
File name:
and enter the file name.
The instrument assigns the file extension *.savrcl (Save/Recall Files) to all files
of type
Instrument State
automatically. The extension cannot be entered.
6. Press
the
Enter
key or click on the
Save
button to save the instrument settings.
The window is closed automatically.
Exit
Shuts down the windows operating system. The current settings are stored on the
hard disk before the system is shut down.