R&S AFQ100A
Baseband Block
1401.3084.32 4.8
E-3
Offset - Rect Test
Signal
Enters a DC component.
Remote-control command:
SOUR:TSIG:RECT:OFFS 0.1
Generate Signal HD -
Rect Test Signal
Generates a signal and saves it to a file on HD.
The
Create Test Signal
window opens automatically and the signal
can be stored as a waveform file.
Remote-control command:
SOUR:TSIG:RECT:CRE:NAM "D:\temp\test.wv"
Generate Signal RAM -
Rect Test Signal
Generates a signal and uses it as output straight away.
Remote-control command:
SOUR:TSIG:RECT:CRE
ARB - Table Sine Test Signal Dialog
The
Table Sine Test Signals
dialog is accessed via the
ARB
main dialog. The dialog can be used to
configure a table sine test signal, i.e. a superposition of two sine waves. Both paths (I and Q) get the
same signal.
In the upper section of the dialog, the table length and
the offset of the resulting signal can be selected. The
table length is the number of sample values of the whole
waveform.
In the Sine 1 section the first sine signal is configured.
In the Sine 2 section the second sine signal is
configured.
In the lower section of the dialog, buttons to load or save
the test signal are provided
