R&S AFQ100A
Bit Error Rate Measurements - BERT Block
1401.3084.32 4.70
E-3
Bit Error Rate Dialog
The
Bit Error Rate
dialog for configuring the bit error rate measurement is called either in the
BERT
function block of the main window or by selecting
BERT
in the
Edit
menu.
The
Bit Error Rate
dialog is divided into the following sections:
The top section indicates if the bit error rate
measurement is active and displays the results
and current status of the measurement.
The
Configuration
section is used to select the
type of measurement, the data source and the
termination criteria.
If the data is not cyclically continued, the
measurement can be selectively interrupted and
restarted. Certain data sections and frames that
have been marked as faulty can be excluded
from the measurement.