R&S AFQ100A
Display
1401.3078.62 3.11
E-3
Block Diagram - Display
The block diagram in the main window shows provided options, signal configuration and the currently
selected signal flow of the modulator with inputs and outputs used. Signal generation can be completely
operated from the block diagram. The highlighted function block can be directly switched on and off with
the
Ctrl
+
T
key combination. Pressing the
Enter
key opens the associated setting dialog.
Each block represents a function of signal generation. The function is indicated in the headline of the
block, e.g.
Baseband.
In this block, the arbitrary waveform generation is set, for instance.
In the check box
, the respective function can be quickly activated/
deactivated with the
Ctrl
+
T
key combination. After activation, the block is
displayed in blue.
Status information is displayed below the check box. It is different for the different
blocks. In the output block, for instance, the selected type of output is indicated.
Pressing the
Enter
key or clicking on the
config...
button opens the associated setting dialog.