RADWAG MAS 1. Y, Руководство пользователя

Страница: 169 / 201

- 169 -
IC_I CR LF - command understood but not accessible at this moment
Disable automatic internal adjustment of the module
Format: IC1 CR LF
Response options:
IC1_I CR LF - command understood but not accessible at this moment
IC1_E CR LF - operation not possible, e.g. in case of verified module
IC1_OK CR LF - command carried out
Operation not possible for verified modules.
For non-verified balances the command disables internal adjustment until it is enabled via
IC0 command or until the balance is turned off. The command does not change module
settings that concern factors determining adjustment process start.
Enable automatic internal adjustment of the module
Format: IC0 CR LF
Response options:
IC0_I CR LF - command understood but not accessible at this moment
IC0_OK CR LF - command carried out
Operation not possible for verified modules.
Give balance serial number
Format: NB CR LF
Response options:
NB_A_”x” CR
LF
- command understood, response: serial number
NB_I CR LF - command understood but not accessible at this moment
x - module serial number, inserted in between inverted commas
Example:
Command: NB CR LF - give serial number
Response: NB_A_”1234567” - module serial number - ”1234567”
Lock scale keypad
Format: K1 CR LF
Response options:
K1_I CR LF - command understood but not accessible at this moment
K1_OK CR LF - command carried out
Command locks the balance keypad (proximity sensors, touch panel) until the moment of
turning the balance off or until sending K0 command.
Unlock scale keypad
Format: K0 CR LF
Response options:
K0_I CR LF - command understood but not accessible at this moment
K0_OK CR LF - command carried out
Give available working modes
Command overview:
Command returns accessible working modes.
Format: OMI <CR><LF>
Response options: