RADWAG MAS 1. Y, Руководство пользователя

Страница: 14 / 201

- 14 -
1.5. Precautions
•
Prior the first use, carefully read this User Manual. Use the device only as intended.
•
Do not operate the touch panel using sharp-edged tools (knife, screwdriver, etc.).
•
Place weighed loads in the centre of the weighing pan.
•
Load the weighing pan with loads of gross weight which does not exceed the maximum
capacity.
•
Mind not to leave heavy loads on the weighing pan for longer periods of time.
•
In case of damage, immediately unplug the device from the mains.
•
Indicators to be decommissioned must be decommissioned in accordance with valid legal
regulations.
•
Do not use the weighing instrument in areas endangered with explosion. The balance is
not intended to be operated in hazardous areas.
1.6. Warranty Conditions
A. RADWAG feels obliged to repair or exchange all elements that appear to be faulty by
production or by construction.
B. Defining defects of unclear origin and means of their elimination can only be realized
with assistance of the manufacturer and user representatives.
C. RADWAG does not bear any responsibility for damage or loss resulting from
unauthorized or inadequate performing of production or service processes,
D. The warranty does not cover:
•
mechanical damage caused by product exploitation other than intended, damage of
thermal and chemical origin, and damage caused by lightning, overvoltage in the
power grid or other random event,
•
damage caused by product exploitation other than intended,
•
mechanical damage, if service claims removing or destroying protective stickers
which secure the balance’s housing against unauthorized access,
•
damage caused by liquids, water and natural wear,
•
damage caused by inappropriate setting or by electrical wiring failures,
•
damage caused by overloading of the mechanical measuring system,
•
inappropriate cleaning habits.
E. Loss of warranty takes place if:
•
a repair is carried out outside RADWAG authorized service point,
•
service claims intrusion into mechanical or electronic construction by unauthorized
people,
•
other than original version of the operating system is installed in a balance,
•
the indicator does not bear company protective stickers.
F. For detailed warranty conditions read the warranty certificate.
1.7. Supervision Over Metrological Parameters
Metrological parameters need to be checked in determined time intervals. Inspection
frequency depends on ambient conditions in which the weighing instrument is operated, kind
of carried out processes and adopted quality management system.