RADWAG MAS 1. Y, Руководство пользователя

Страница: 135 / 201

- 135 -
weight is valid only when you weigh samples
without use of tare containers. If taring function is
used then pictogram informing on use of
minimum sample weight goes blank and the
software carries out weighing with tare (no
determined minimum sample weight).
You can preview the entered data, but you are not allowed to edit it.
30.15. Mass Controls
(mode not available in balance’s standard version)
Each report on completed product control is sent to a printer and saved to the <Mass
controls> database. Each control saved to the database features specific number assigned
at the moment of control completion.
Mass control number format:
y y / M M / d d / H H / m m
, where:
yy - year of control end,
MM - month of control end,
dd - day of control end,
HH - hour of control end,
mm - minute of control end,
You can preview data on each control.
Procedure:
•
Enter < Databases> submenu in accordance with section 30 of this user manual.
•
Enter < Mass controls> database and press respective record.
List of parameters defined for control:
The reports contain the following information:
Batch number Number of controlled batch
Start date Control process start date
End date Control process end date
Operator Operator carrying out control process
Product Controlled product
Mean Mean mass value determined during control
Mean [%] Mean mass value determined during control [%]
Standard deviation Standard deviation of carried out control
Standard deviation [%] Standard deviation of carried out control [%]
T2- errors quantity
T1- errors quantity
T1+ errors quantity
T2+ errors quantity