RADWAG MAS 1. Y, Руководство пользователя

Страница: 107 / 201

- 107 -
Destructive empty –full
Batch portion
Measurement series for control: Non-destructive
empty – full, Destructive full – empty, Destructive
empty – full
Unit Unit of a product: [g] or [ml].
Batch quantity Declaring quantity of controlled batch
Interval of
average tare
determination
Time interval given in [h] determining how often
average tare must be estimated for a given product.
Packaging
quantity
Declaring quantity of packages that are to be
subjected to process of average tare determination
(for Non-destructive average tare type of control)
Internal control
Submenu for determining internal criteria for a control
(see: table below).
Density Product density (value range: 0.1g/cm
3
- 5g/cm
3
).
Apart from the above listed options there are other ones which may be used for different
working modes (e.g. CHECKWEIGHING, THRESHOLDS, etc.)
•
List of parameters defined for internal criteria:
Internal control
<YES> - enable internal control criteria, <NO> - disable
internal control criteria
Sample quantity Sample quantity for a product
[- T] error value
Max permissible value of –T error given in unit set for a
product. Measurements lower than Qn-T will be
considered incorrect
[+ T] error value
Max permissible value of +T error given in unit set for a
product. Measurements higher than Qn+T will be
considered incorrect
Disqualifying quantity of
samples [Qn – 2T]
Quantity of -2T errors disqualifying tested sample
Disqualifying quantity of
samples [Qn + 2T]
Quantity of +2T errors disqualifying tested sample
Disqualifying quantity of
samples [Qn - T]
Quantity of -T errors disqualifying tested sample
Disqualifying quantity of
samples [Qn + T]
Quantity of +T errors disqualifying tested sample
Average limit
Mode for determination of average limit value (constant
or automatic)
Average limit [-]
Average limit value (minus) for a tested sample (value of
average limit as 'constant')
Average limit [+]
Average limit value (plus) for a tested sample (value of
average limit as 'constant')
Coefficient value [-Wk]
Multiplier of standard deviation for value of average limit
(minus) calculated automatically